Spanning Tree Commands 731
clear spanning-tree detected-protocols
Use the clear spanning-tree detected-protocols command in Privileged
EXEC mode to restart the protocol migration process (force the renegotiation
with neighboring switches) on all interfaces or on the specified interface.
Syntax
clear spanning-tree detected-protocols [{gigabitethernet
unit/slot/port
|
port-channel
port-channel-number
| tengigabitethernet
unit/slot/port
}]
Default Configuration
This command has no default setting.
Command Mode
Privileged EXEC mode
User Guidelines
This feature is used only when working in RSTP or MSTP mode.
Example
The following example restarts the protocol migration process (forces the
renegotiation with neighboring switches) on 1/0/1.
console#clear spanning-tree detected-protocols
gigabitethernet 1/0/1
exit (mst)
Use the exit command in MST mode to exit the MST configuration mode
and apply all configuration changes.
Syntax
exit
Default Configuration
MST configuration.
2CSPC4.XCT-SWUM2XX1.book Page 731 Monday, October 3, 2011 11:05 AM