Dell manual show line

1410 Line Commands
Syntax
line {console | telnet | ssh}
• console — Console terminal line.
•
telnet — Virtual terminal for remote console access (Telnet).
•
ssh — Virtual terminal for secured remote console access (SSH).
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
The default authentication list for telnet and SSH is enableNetList. The
enableNetList uses a single method: enable. This implies that users accessing
the switc h via te lnet or S SH must have an enable p assword define d in orde r to
access privileged mode. Alternatively, the administrator can set the telnet and
ssh lists to enableList, which has the enable and none methods defined.
Examples
The following example sets the telnet authentication list to enableList:
console(config)#line telnet
console(config-telnet)#enable authentication
enableList
The following example enters Line Configuration mode to configure Telnet.
console(config)#line telnet
console(config-line)#
show line
Use the show line command in User EXEC mode to display line parameters.
2CSPC4.XCT-SWUM2XX1.book Page 1410 Monday, October 3, 2011 11:05 AM