Dell user group moveusers, user group name

1336 Captive Portal Commands
user group moveusers
Use the user group moveusers command to move a group's users to a different
group.
Syntax
user group group-id moveusers new-group-id
• group-id —Group ID (Range: 1–10).
•
new-group-id —Group ID (Range: 1–10).
Default Configuration
There is no default configuration for this command.
Command Mode
Captive Portal Configuration mode
User Guidelines
The new group-id must already exist.
Example
console(config-CP)#user group 2 moveusers 3
user group name
Use the user group name command to configure a group name.
Syntax
user group group-id name name
• group-id —Group ID (Range: 1–10).
•
name —Group name (Range: 1–32 chara cters).
Default Configuration
User groups have no names by default.
2CSPC4.XCT-SWUM2XX1.book Page 1336 Monday, October 3, 2011 11:05 AM