1006 IPv6 PIM Commands
show ipv6 pim rp hash
Use the show ipv6 pim rp hash command to display the rendezvous point
(RP) selected for the specified group address.
Syntax
show ipv6 pim rp hash {
group-address
}
Parameter Description
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC modes
User Guidelines
There are no user guidelines for this command. Field descriptions are shown
in the following table.
Example
(console) # show ipv6 pim rp-hash ff1e:abcd:fed1::0
RP Address 2001:0db8:0:abcd::1
Type Static
Parameter Description
group-address A valid group IP address supported by RP.
Field Description
RP Address Address of the RP
Type Origin from where this group mapping is learned
2CSPC4.XCT-SWUM2XX1.book Page 1006 Monday, October 3, 2011 11:05 AM