RADIUS Commands 709
Default Configuration
The message authenticator attribute is enabled by default.
Command Mode
Radius mode
User Guidelines
There are no user guidelines for this command.
Example
console(Config-auth-radius)#msgauth
name (RADIUS server)
Use the name command to assign a name to a RADIUS server. Use the no
form of the command to return the name to the default (unspecified). The
no form of the command does not require the user to enter the configured
name.
Syntax
name servername
no name
Parameter Description
Default Configuration
The default RADIUS server name is Default-RADIUS-Server.
Command Mode
Radius Config mode
Parameter Description
servername The name for the RADIUS server (Range: 1 - 32 characters).
2CSPC4.XCT-SWUM2XX1.book Page 709 Monday, October 3, 2011 11:05 AM