692 QoS Commands
----------- ----------- ------------ -------------------
1/0/1 in Down DELL
show interfaces cos-queue
Use the show interfaces cos-queue command in Privileged EXEC mode to
display the class-of-service queue configuration for the specified interface.
Syntax
show interfaces cos-queue [{gigabitethernet
unit/slot/port
|
port-channel
port-channel-number
| tengigabitethernet
unit/slot/port
}]
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
If the interface is specified, the class-of-service queue configuration of the
interface is displayed. If omitted, the most recent global configuration
settings are displayed.
Examples
The following example displays the COS configuration with no unit/slot/port
or port-channel parameter.
console#show interfaces cos-queue
Global Configuration
Interface Shaping Rate......................... 0
Queue Id Min. Bandwidth Scheduler Type Queue
Management Type
-------- -------------- -------------- --------------
2CSPC4.XCT-SWUM2XX1.book Page 692 Monday, October 3, 2011 11:05 AM