Dell show ip mcast boundary

Multicast Commands 1085
Example
The following example displays system-wide multicast information.
console#show ip multicast
Admin Mode........................... Enabled
Protocol State....................... Non-Operational
Table Max Size .......................... 256
Protocol................................. PIMDM
Multicast Forwarding Cache Entry Count .. 0
show ip mcast boundary
Use the show ip mcast boundary command in Privileged EXEC mode to
display all the configured administrative scoped multicast boundaries.
Syntax
show ip mcast boundary {vlan vlan-id | all}
• vlan-id — Valid VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays all the configured administrative scoped
multicast boundaries.
console#show ip mcast boundary all
MULTICAST BOUNDARY
2CSPC4.XCT-SWUM2XX1.book Page 1085 Monday, October 3, 2011 11:05 AM