Command Groups 111
VLAN
Command Description Modea
dvlan-tunnel ethertype Configures the EtherType for the interface. GC
interface vlan Enters the interface configuration (VLAN)
mode.
GC
interface range vlan Enters the interface configuration mode to
configure multiple VLANs.
GC
mode dvlan-tunnel Enables Double VLAN tunneling on the
specified interface.
IC
name Configures a name to a VLAN. IC
protocol group Attaches a

vlanid

to the protocol-based VLAN
identified by
groupid
.
VLAN
protocol vlan group Adds the physical unit/slot/port interface to the
protocol-based VLAN identified by
groupid
.
IC
protocol vlan group all Adds all physical unit/slot/port interfaces to the
protocol-based VLAN identified by
groupid
.
GC
show dvlan-tunnel Displays all interfaces enabled for Double
VLAN Tunneling.
PE
show dvlan-tunnel interfaceDisplays detailed information about Double
VLAN Tunneling for the specified interface.
PE
show interfaces switchport Displays switchport configuration. PE
show port protocol Displays the Protocol-Based VLAN information
for either the entire system or for the indicated
group.
PE
show vlan Displays detailed information, including
interface information and dynamic vlan type,
for a specific VLAN.
PE
show vlan association mac Displays the VLAN associated with a specific
configured MAC address.
PE
show vlan association
subnet
Displays the VLAN associated with a specific
configured IP subnet.
PE
switchport access vlan Configures the VLAN ID when the interface is
in access mode.
IC
2CSPC4.XCT-SWUM2XX1.book Page 111 Monday, October 3, 2011 11:05 AM