802.1x Commands 841
show dot1x users
Use the show dot1x users command in Privileged EXEC mode to display
802.1x authenticated users for the switch.
Syntax
show dot1x users [username
username
]
•
username
— Supplicant
username (Range: 1–160 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
EapolRespFramesRx The number of valid EAP Response frames (other than
Resp/Id frames) that have been received by this
Authenticator.
EapolReqIdFramesTx The number of EAP Req/Id frames that have been
transmitted by this Authenticator.
EapolReqFramesTx The number of EAP Request frames (other than Rq/Id
frames) that have been transmitted by this
Authenticator.
InvalidEapolFramesRx The number of EAPOL frames that have been received
by this Authenticator in which the frame type is not
recognized.
EapLengthErrorFramesRx The number of EAPOL frames that have been received
by this Authenticator in which the Packet Body Length
field is invalid.
LastEapolFrameVersion The protocol version number carried in the most recently
received EAPOL frame.
LastEapolFrameSource The source MAC address carried in the most recently
received EAPOL frame.
Field Description
2CSPC4.XCT-SWUM2XX1.book Page 841 Monday, October 3, 2011 11:05 AM