96 Command Groups
IPv6 ACL
ip domain-name Defines a default domain name to complete
unqualified host names.
GC
ip host Configures static host name-to-address
mapping in the host cache.
GC
ip name-server Configures available name servers. GC
ipv6 address (Interface
Config)
Sets the IPv6 address of the management
interface.
IC
ipv6 address (OOB Port) Sets the IPv6 prefix on the out-of-band port. IC
ipv6 address dhcp Enables the DHCPv6 client on an IPv6
interface.
IC
ipv6 enable (Interface
Config)
Enables IPv6 on the management interface. GC
ipv6 enable (OOB Config) Enables IPv6 operation on the out-of-band
interface.
IC
ipv6 gateway (OOB
Config)
Configures the address of the IPv6 gateway. IC
show hosts Displays the default domain name, a list of
name server hosts, static and cached list of host
names and addresses.
UE
show ip address-conflict Displays the status information corresponding
to the last detected address conflict.
UE or
PE
show ip helper-address Displays the ip helper addresses configuration. PE
show ipv6 dhcp interface
out-of-band statistics
Displays IPv6 DHCP statistics for the out-of-
band interface.
PE
show ipv6 interface out-of-
band
Displays the IPv6 out-of-band port
configuration.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command Description Modea

{deny | permit}Creates a new rule for the current IPv6 access

list.
v6ACL
Command Description Modea
2CSPC4.XCT-SWUM2XX1.book Page 96 Monday, October 3, 2011 11:05 AM