ACL Commands 281
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet, Port-channel)
User Guidelines
To specify multiple protocols, enter the protocol parameters together on the
command line, separated by spaces. This command can only be entered once
per interface if no intervening no service-acl input command has been
entered.
show service-acl interface
This command displays the status of LLPF rules configured on a particular
port or on all the ports.
Syntax
show service-acl interface {
interface-id
| all}
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Parameter Description
interface-id Any physical or logical interface. See Interface Naming
Conventions for interface representation.
2CSPC4.XCT-SWUM2XX1.book Page 281 Monday, October 3, 2011 11:05 AM