654 QoS Commands
Syntax
classofservice trust {dot1p | untrusted | ip-dscp}
no classofservice trust
•
dot1p
— Specifies that the mode be set to trust dot1p (802.1p) packet
markings.
•
untrusted
— Sets the Class of Service Trust Mode for all interfaces to
Untrusted.
•
ip-dscp
— Specifies that the mode be set to trust IP DSCP packet
markings.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode or Interface Configuration (gigabitethernet,
port-channel, tengigabitethernet) mode
User Guidelines
This command has no user guidelines.
Examples
The following example displays how you se t the class of service trust mode of
an interface to trust dot1p (802.1p) packet markings when in Global
Configuration mode.
console(config)#classofservice trust dot1p
The following example displays how you se t the class of service trust mode of
an interface to trust IP Precedence packet mark
console(config)#classofservice trust ip-precedence
conform-color
Use the conform-color command in Policy-Class-Map Configuration mode
to specify second-level matching for traffic flow, the only possible actions are
drop, setdscp-transmit, set-prec-transmit, or transmit. In this two-rate form
2CSPC4.XCT-SWUM2XX1.book Page 654 Monday, October 3, 2011 11:05 AM