418 Ethernet Configuration Commands
User Guidelines
This command has no user guidelines.
Example
The following example displays the status for all configured interfaces.
console#show interfaces status
Port Name Duplex Speed Neg Link Flow Control
State Status
------- -------------- ------ ------- ---- ----- ------------
Gi1/0/1 N/A Unknown Auto Down Inactive
Gi1/0/2 N/A Unknown Auto Down Inactive
Gi1/0/3 ADM-10.0.12.13 N/A Unknown Auto Down Inactive
show statistics
Use the show statistics command in Privileged EXEC mode to display
detailed statistics for a specific port or for the entire switch.
Syntax
show statistics {gigabitethernet
unit/slot/port
|switchport |
port-channel
port-channel-number
| tengigabitethernet
unit/slot/port
}
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
Parameter Description
unit/slot/port
A valid interface. See Interface Naming Conventions for
interface representation.
switchport Displays statistics for the entire switch.
2CSPC4.XCT-SWUM2XX1.book Page 418 Monday, October 3, 2011 11:05 AM