Address Table Commands 305
1 0001.02F1.0B33 Dynamic gi1/0/1
show mac address-table interface
Use the show mac address-table command in User EXEC or Privileged EXEC
mode to display all entries in the mac address-table.
Syntax
show mac address-table interface
interface-id
[vlan
vlan-id
]
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
In this example, all classes of entries in the bridge-forwarding database for
gigabit Ethernet interface 1/0/1 are displayed.
console#show mac address-table interface
gigabitethernet 1/0/1
Aging time is 300 Sec
Vlan Mac Address Type Port
Parameter Description
interface-id Specify an interf ace type.Valid interfaces include physical ports
and port channels.
vlan-id Specify a valid VLAN. The range is 1 to 4093.
2CSPC4.XCT-SWUM2XX1.book Page 305 Monday, October 3, 2011 11:05 AM