IPv6 Routing Commands 1051
The column headings of the table associated with the interface are as follows:
Example
console#show ipv6 mld-proxy interface
Interface................................ vlan 10
Ver Query Rcvd Report Rcvd Report Sent Leave Rcvd Leave Sent
------------------------------------------------------------------
1 2 0 0 0 2
2 3 0 4 ----- -----
show ipv6 mld traffic
The show ipv6 mld traffic command is used to display MLD statistical
information for the router.
Syntax
show ipv6 mld traffic
Default Configuration
There is no default configuration for this command.
Parameter Description
Interface The MLD Proxy interface.
Parameter Description
Ver The MLD version.
Query Rcvd Number of MLD queries received.
Report Rcvd Number of MLD reports received.
Report Sent Number of MLD reports sent.
Leaves Rcvd Number of MLD leaves received. Valid for version 2 only.
Leaves Sent Number of MLD leaves sent on the Proxy interface. Valid for version 2
only.
2CSPC4.XCT-SWUM2XX1.book Page 1051 Monday, October 3, 2011 11:05 AM