1044 IPv6 Routing Commands
The following information is displayed if the operational mode of the MLD interface is enabled:
MLD Global
Admin Mode
This field displays the configured global administrative status of
MLD.
MLD Interface
Admin Mode
This field displays the configured interface administrative status
of MLD.
MLD Operational
Mode
The operational status of MLD on the interface.
MLD Version This field indicates the version of MLD configured on the
interface.
Query Interval This field indicates the configured query interval for the
interface.
Query Max
Response Time
This field indicates the configured maximum query response
time (in seconds) advertised in MLD queries on this interface.
Robustness This field displays the configured value for the tuning for the
expected packet loss on a subnet attached to the interface.
Startup Query
Interval
This value indicates the configured interval between General
Queries sent by a Querier on startup.
Startup Query
Count
This value indicates the configured number of Queries sent out
on startup, separated by the Startup Query Interval.
Last Member
Query Interval
This value indicates the configured Maximum Response Time
inserted into Group-Specific Queries sent in response to Leave
Group messages.
Last Member
Query Count
This value indicates the configured number of Group-Specific
Queries sent before the router assumes that there are no local
members.
Field Description
Querier Status This value indicates whether the interface is a MLD querier or
non-querier on the subnet with which it is associated.
Querier Address The IP address of the MLD querier on the subnet the interface
with which it is associated.
Querier Up Time Time elapsed in seconds since the querier state has been
updated.
2CSPC4.XCT-SWUM2XX1.book Page 1044 Monday, October 3, 2011 11:05 AM