1048 IPv6 Routing Commands
Example
console#show ipv6 mld-proxy groups
Interface................................ vlan 10
Group Address Last Reporter Up Time Member State Filter Mode Sources
------------- -------------- ---------- ----------------- ------------ -----
--
FF1E::1 FE80::100:2.3 00:01:40 DELAY_MEMBER Exclude 2
FF1E::2 FE80::100:2.3 00:02:40 DELAY_MEMBER Include 1
FF1E::3 FE80::100:2.3 00:01:40 DELAY_MEMBER Exclude 0
FF1E::4 FE80::100:2.3 00:02:44 DELAY_MEMBER Include 4
show ipv6 mld-proxy groups detail

Use the show ipv6 mld-proxy groups detail command to display information

about multicast groups that MLD Proxy reported.

Syntax

show ipv6 mld-proxy groups detail

Default Configuration
There is no default configuration for this command.
Last Reporter The IP address of the host that last sent a membership report for the
current group on the network attached to the MLD-Proxy interface
(upstream interface).
Up Time (in
secs)
The time elapsed in seconds since last created.
Member State Possible values are:
• Idle_Member —The interface has responded to th e latest group
membership query for this gr oup.
• Delay_Member—The interface is going to send a group
membership report to respond to a group membership que ry for
this group.
Filter Mode Possible values are Include or Exclude.
Sources The number of sources attached to the multicast group.
2CSPC4.XCT-SWUM2XX1.book Page 1048 Monday, October 3, 2011 11:05 AM