Command Groups 119
GMRPIGMP
show ip dvmrp Displays the system-wide information for
DVMRP.
PE
show ip dvmrp interface Displays the interface information for DVMRP
on the specified interface.
PE
show ip dvmrp neighbor Displays the neighbor information for DVMRP. PE
show ip dvmrp nexthop D

isplays the next hop information on

outgoing interfaces for routing multicast

datagrams.

PE
show ip dvmrp prune Displays the table that lists the router’s
upstream prune information.
PE
show ip dvmrp route Displays the multicast rout ing information for
DVMRP.
PE
a. For the meaning of each Mode abbrevi ation, see Mode Types on page 79.
Command Description Modea
a. For the meaning of each Mode abbrevi ation, see Mode Types on page 79.
gmrp enable Enables GMRP globally or on a port. GC or
IC
show gmrp configuration Displays GMRP configuration. GC or
IC
Command Description Modea
ip igmp Sets the administrative mode of IGMP in the
system to active.
GC
ip igmp last-member-query-
count
Sets the number of Group-Specific Queries
sent before the router assumes that there are
no local members on the interface.
IC
ip igmp last-member-query-
interval
Configures the Maximum Response Time
inserted in Group-Specific Queries which are
sent in response to Leave Group messages.
IC
Command Description Modea
2CSPC4.XCT-SWUM2XX1.book Page 119 Monday, October 3, 2011 11:05 AM