Dell Pingable VRRP Commands ip vrrp accept-mode

Virtual Router Redundancy Protocol Commands 1289
Example
The following example displays all statistical information about the VLAN 15
virtual router.
console#show vrrp interface stats vlan 15 5
UpTime..................... 0 days 0 hrs 0 mins 0 secs
Protocol....................................... IP
State Transitioned to Master................... 0
Advertisement Received......................... 0
Advertisement Interval Errors.................. 0
Authentication Failure......................... 0
IP TTL Errors.................................. 0
Zero Priority Packets Received................. 0
Zero Priority Packets Sent..................... 0
Invalid Type Packets Received.................. 0
Address List Errors ........................... 0
Invalid Authentication Type.................... 0
Authentication Type Mismatch................... 0
Packet Length Errors........................... 0
Pingable VRRP Commands
ip vrrp accept-mode
Use the ip vrrp accept-mode command in Interface (VLAN) Configuration
mode to enable the VRRP Master to accept ping packets sent to one of the
virtual router’s IP addresses. Use the no form of the command to disable
responding to ping packets.
Syntax
ip vrrp vrid accept-mode
2CSPC4.XCT-SWUM2XX1.book Page 1289 Monday, October 3, 2011 11:05 AM