484 IGMP Snooping Commands
Syntax
ip igmp snooping mrouter-time-out
time-out
no ip igmp snooping mrouter-time-out
•
time-out
— mrouter timeout in seconds for IGMP. (Range: 1–3600)
Default Configuration
The default value is 300 seconds.
Command Mode
Interface Configuration (gigabitethernet, port-channel, tengigabitethernet)
mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the mrouter timeout to 200 seconds.
console(config-if-1/0/1)#ip igmp snooping mrouter-
time-out 200
show ip igmp snooping
Use the show ip igmp snooping command in Privileged EXEC mode to
display the IGMP snooping configuration.
Syntax
show ip igmp snooping [vlan
vlan-id
]
Parameter Description
Parameter Description
vlan-id Specifies a VLAN ID value (available only in Privileged EXEC
mode).
2CSPC4.XCT-SWUM2XX1.book Page 484 Monday, October 3, 2011 11:05 AM