DHCP Snooping Commands 365
show ip dhcp snooping interfaces
Use the show ip dhcp snooping interfaces command to show the DHCP
Snooping status of the interfaces.
Syntax
show ip dhcp snooping interfaces [
interface
]
• interface—A valid physical interface.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC
User Guidelines
There are no user guidelines for this command.
Example
console#show ip dhcp snooping interfaces
Interface Trust State Rate Limit Burst Interval
(pps) (seconds)
---------- ------------- ------------- ---------------
1/0/1 No 15 1
1/0/2 No 15 1
1/0/3 No 15 1
console#show ip dhcp snooping interfaces gigabitethernet 1/0/15
Interface Trust State Rate Limit Burst Interval
(pps) (seconds)
---------- ------------- ------------- ---------------
2CSPC4.XCT-SWUM2XX1.book Page 365 Monday, October 3, 2011 11:05 AM