1462 RMON Commands
rmon collection history
Use the rmon collection history command in Interface Configuration mode
to enable a Remote Monitoring (RMON) MIB history statistics group on an
interface. To remove a specified RMON history statistics group, use the no
form of this command. Also see the show rmon collection history command.
Syntax
rmon collection history
index
[owner

ownername

] [buckets

bucket-number

]
[interval
seconds
]
no rmon collection history
index
•

index

— The requested statistics index group. (Range: 1–65535)
•
owner

ownername

— Records the RMON statistics group owner name. If
unspecified, the name is an empty string.
•
buckets

bucket-number

— A value associated with the number of buckets
specified for the RMON collection history group of statistics. If
unspecified, defaults to 50. (Range: 1 - 65535)
•
interval
seconds
— The number of seconds in each polling cycle. If
unspecified, defaults to 1800. (Range: 1–3600)
Default Configuration
The buckets configuration is 50. The interval configuration is 1800 seconds.
Command Mode
Interface Configuration (gigabitethernet, port-channel, tengigabitethernet)
mode.
User Guidelines
This command cannot be executed on multiple ports using the interface
range command.
Example
The following example enables a Remote Monitoring (RMON) MIB history
statistics group on port 1/0/8 with the index number "1" and a polling interval
period of 2400 seconds.
2CSPC4.XCT-SWUM2XX1.book Page 1462 Monday, October 3, 2011 11:05 AM