DHCP Layer 2 Relay Commands 339
DHCP L2 Relay is Enabled.
VLAN Id L2 Relay CircuitId RemoteId
--------- ---------- ----------- ------------
5 Enabled Enabled --NULL--
6 Enabled Enabled broadcom
7 Enabled Disabled --NULL--
8 Enabled Disabled --NULL--
9 Enabled Disabled --NULL--
10 Enabled Disabled --NULL—
show dhcp l2relay vlan
Use the show dhcp l2relay vlan command in Privileged EXEC mode to
display whether DHCP L2 Relay is globally enabled on the specified VLAN or
VLAN range.
Syntax
show dhcp l2relay vlan
vlan-range
Parameter Description
Default Configuration
This command has no default configuration.
Parameter Description
vlan-range Show information for the specified VLAN range. A range may
be a single VLAN ID or two VLAN IDs separated by a single
dash with no embedded spaces.
2CSPC4.XCT-SWUM2XX1.book Page 339 Monday, October 3, 2011 11:05 AM