678 QoS Commands
User Guidelines
Only one style of police command (simple) is allowed for a given class
instance in a particular policy.
Example
The following example shows how to establish the traffic policing style for the
specified class.
console(config-policy-classmap)#police-simple 33 34
conform-action transmit violate-action transmit
policy-map
Use the policy-map command in Global Configuration mode to establish a
new DiffServ policy or to enter policy map configuration mode. To remove
the policy, use the no form of this command.
Syntax
policy-map

policyname

[in|out]
no policy-map

policyname

Parameter Description
Default Configuration
This command has no default configuration.
Parameter Description
policyname
Specifies the DiffServ policy name as a unique case-sensitive
alphanumeric string of characters. (Range: 1–31 alphanumeric
characters.)
in The policy is applied on ingress. Must be specified to create
new DiffServ policies. An existing policy can be selected
without specifying "in" or "out".
out The policy is applied on egress. Either "in" or "out" must be
specified to create a new DiffServ policy. An existing policy may
be selected without the "in" or "out" parameter.
2CSPC4.XCT-SWUM2XX1.book Page 678 Monday, October 3, 2011 11:05 AM