952 IP Helper/DHCP Relay Commands
Parameter Description
This command has no arguments or keywords.
Default Configuration
This is enabled by default for a DHCP relay agent.
Command Mode
Global Configuration mode
User Guidelines
Enable DHCP Relay using the ip helper enable command. Interface
configuration takes precedence over global configuration. However if there is
no interface configuration then global configuration is followed.
This check is enabled by default. The administrator has to ensure that the
relay should b e configured such that onl y it should i nsert optio n-82 fields a nd
no other device near the client has the facility to insert options.
Example
The following example enables relay information check globally:
console(config)#ip dhcp relay information check
ip dhcp relay information check-reply
Use the ip dhcp relay information check-reply command to enable DHCP
Relay to check that the relay agent information option in forwarded
BOOTREPLY messages is valid. If an invalid message is received, the relay
agent drops it. This information check will take effect, though enabled, only
when the relay agent interface is enabled to insert the sub-options.
Syntax
ip dhcp relay information check-reply [none]
no ip dhcp relay information check-reply
2CSPC4.XCT-SWUM2XX1.book Page 952 Monday, October 3, 2011 11:05 AM