1452 Power Over Ethernet Commands
Usage Guidelines
No specific guidelines.
Default Value
Low
Examples
console(config)#interface gigabitethernet 1/0/1
console(config-if-1/0/1)# power inline priority high
power inline priority enable
Use the power inline priority enable command along with the power inline
management command for power management. If priority is enabled, when a
PD is detected on a port and there is insufficient power to supply the PD, and
there is a lower priority port delivering power, it is turned off. If priority is
disabled, power is delivered to ports on a first come, first served basis. Use the
no form of this command to disable the priority.
The default threshold for determining if insufficient power is available is 96%
of available power.
Syntax Description
power inline priority enable
no power inline priority enable
Default Value
Default value is enabled.
Command Mode
Global Configuration
User Guidelines
This command has no user guidelines.
2CSPC4.XCT-SWUM2XX1.book Page 1452 Monday, October 3, 2011 11:05 AM