IPv6 PIM Commands 999
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 pim spt-threshold 1000
ipv6 pim ssm
Use the ipv6 pim ssm command to administratively configure PIM Source
Specific Multicast (SSM) range of addresses for IPv6 multicast routing. Use
the no fo rm of thi s comma nd to re moved co nfigur ed range s of add resses f rom
the router.
Syntax
ipv6 pim ssm { default |
group-address
group-mask
}
no ipv6 pim ssm { default |
group-address
group-mask
}
Parameter Description
Default Configuration
There are no group addresses configured by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Parameter Description
default Defines the SSM range access list to 232/8.
group-address An IPv6 multicast group address.
group-mask An IPv6 mask in /prefix form.
2CSPC4.XCT-SWUM2XX1.book Page 999 Monday, October 3, 2011 11:05 AM