992 IPv6 PIM Commands
ipv6 pim bsr-candidate
Use the ipv6 pim bsr-candidate command to configure the router to advertise
itself as a bootstrap router (BSR). Use the no form of this command to return
to the default configuration.
Syntax
ipv6 pim bsr-candidate vlan {

vlan-id hash-mask-len

bsr-priority

[interval

interval
]}
no ipv6 pim bsr-candidate vlan {
vlan-id
}
Parameter Description
Default Configuration
None - The router does not advertise itself as an BSR candidate.
Command Mode
Global Configuration mode
User Guidelines
All multicast groups with the same hash value correspond to the same RP.
Lower priority values are preferred.
Parameter Description
vlan-id A valid VLAN identifier with multicast routing enabled.
hash-mask-len The length of the BSR hash to be AND’ed with the multicast
group address. Range 0-32. Default 0.
bsr-priority The advertised priority of the bsr-candidate.
Range: 0–255.
Default 0.
interval (Optional) Indicates the BSR candidate advertisement interval.
The range is from 1 to 16383 seconds. The default value is 60
seconds.
2CSPC4.XCT-SWUM2XX1.book Page 992 Monday, October 3, 2011 11:05 AM