Command Groups 155
sFlowSNMP
Command Description Modea
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
sflow destination Configures sFlow collector parameters (owner
string, receiver timeout, ip address, and port).
GC
sflow polling Enables a new sflow poller instance for the data
source if rcvr_idx is valid.
GC
sflow polling (Interface
Mode)
Enable a new sflow poller instance for this data
source if rcvr_idx is valid.
IC
sflow sampling Enables a new sflow sampler instance for this
data source if rcvr_idx is valid.
GC
sflow sampling (Interface
Mode)
Enables a new sflow sampler instance for this
data source if rcvr_idx is valid.
IC
show sflow agent Displays the sflow agent information. PE
show sflow destination Displays all the configuration information
related to the sFlow receivers.
PE
show sflow polling Displays the sFlow polling instances created on
the switch.
PE
show sflow sampling Displays the sFlow sampling instances created
on the switch.
PE
Command Description Modea
show snmp Displays the SNMP status. PE
show snmp engineID Displays the SNMP engine ID. PE
show snmp filters Displays the configuration of filters. PE
show snmp group Displays the configuration of groups. PE
show snmp user Displays the configuration of users. PE
show snmp views Displays the configuration of views. PE
show trapflags Displays SNMP traps globally or displays
specific SNMP traps.
PE
2CSPC4.XCT-SWUM2XX1.book Page 155 Monday, October 3, 2011 11:05 AM