System Management Commands 1625
1 Fan 4 OK
Power Supplies:
Unit Description Status Source
---- ----------- ----------- ------
1 Main OK AC
1 Secondary Failure DC
show system id
Use the show system id command in User EXEC mode to display the system
identity information.
Syntax
show system id [
unit
]
•
unit
— The unit number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
The tag information is on a switch by switch basis.
Example
The following example displays the system service tag information.
2CSPC4.XCT-SWUM2XX1.book Page 1625 Monday, October 3, 2011 11:05 AM