VLAN Commands 779
User Guidelines
This command has no user guidelines.
Example
The following example displays how to add a physical port interface to the
group ID of "2."
console(config-if-1/0/1)#protocol vlan group 2
protocol vlan group all
Use the protocol vlan group all command in Global Configuration mode to
add all physical interfaces to the protocol-based group identified by
groupid
.
A group may have more than one interface associated with it. Each interface
and protocol combination can be associated with one group only. If adding an
interface to a group causes any conflicts with protocols currently associated
with the group, this command fails and the interface(s) are not added to the
group. En sure th at the re ference d VLAN i s create d prior to the c reation of the
protocol-based group except when GVRP is expected to create the VLAN.
To remove all interfaces from this protocol-based group that is identified by
this
groupid
, use
the no form of the command
Syntax
protocol vlan group all
groupid
no protocol vlan group all
groupid
•
groupid
— The protocol-based VLAN group ID, which is automatically
generated when you create a protocol-based VLAN group with the
vlan
protocol group
command. To see the group ID associated with the name
of a protocol group, use the
show port protocol all
command.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
2CSPC4.XCT-SWUM2XX1.book Page 779 Monday, October 3, 2011 11:05 AM