DHCP Server and Relay Agent Commands 881
Parameter Description
Default Configuration
There is no default name server configured.
Command Mode
DHCP Pool Configuration mode
User Guidelines
Use the show ip dhcp pool command to display pool configuration
parameters. Up to eight name server addresses may be specified. The
NetBIOS WINS information is conveyed in the Option 44 TLV of the DHCP
OFFER, DCHP ACK, DHCP INFORM ACK and DHCP BOOTREPLY
messages.
Example
console(config-dhcp-pool)#netbios-name-server
192.168.21.1 192.168.22.1
netbios-node-type
Use the netbios-node-type command in DHCP Pool Configuration mode to
set the NetBIOS node type for a Microsoft DHCP client. Use the no form of
the command to remove the netbios node configuration.
Syntax
netbios-node-type
type
no netbios-node-type
Parameter Description
ip-address IPv4 address
2CSPC4.XCT-SWUM2XX1.book Page 881 Monday, October 3, 2011 11:05 AM