1408 Line Commands
User Guidelines
To specify no timeout, enter the exec-timeout 0 command.
Example
The following example configures the interval that the system waits until user
input is detected to 20 minutes.
console(config)#line console
console(config-line)#exec-timeout 20
history
Use the history command in Line Configuration mode to enable the
command history function. To disable the command history function, use the
no form of this command.
Syntax
history
no history
Default Configuration
The default value for this command is
enabled
.
Command Mode
Line Interface mode
User Guidelines
This command has no user guidelines.
Example
The following example disables the command history function for the current
terminal session.
console(config-line)# no history
2CSPC4.XCT-SWUM2XX1.book Page 1408 Monday, October 3, 2011 11:05 AM