IGMP Commands 937
show ip igmp membership
Use the show ip igmp membership command in Privileged EXEC mode to
display the list of interfaces that have registered in the multicast group. If
detail is specified, this command displays detailed information about the
listed interfaces.
Syntax
show ip igmp membership [

groupaddr

]
[detail]
•

groupaddr

— Group IP address
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes
User Guidelines
This command has no user guidelines.
Examples
The following examples display the list of interfaces that have registered in
the multicast group at IP address 224.5.5.5, the latter in detail mode.
console#show ip igmp interface membership 224.5.5.5
console(config)#show ip igmp interface membership 224.5.5.5 detail
show ip igmp interface stats
Use the show ip igmp interface stats command in User EXEC mode to
display the IGMP statistical information for the interface. The statistics are
only displayed when the interface is enabled for IGMP.
Syntax
show ip igmp interface stats vlan
vlan-id
2CSPC4.XCT-SWUM2XX1.book Page 937 Monday, October 3, 2011 11:05 AM