RADIUS Commands 711
Syntax
primary
Default Configuration
There is no primary authentication server by default.
Command Mode
Radius mode
User Guidelines
There are no user guidelines for this command.
Example
console(Config-auth-radius)#primary
priority
Use the priority command in Radius mode to specify the order in which the
servers are to be used, with 0 being the highest priority.
Syntax
priority
priority
•
priority —
Sets server priority level. (Range 0-65535)
Default Configuration
The default priority is 0.
Command Mode
Radius mode
User Guidelines
User must enter the mode corresponding to a specific Radius server before
executing this command.
2CSPC4.XCT-SWUM2XX1.book Page 711 Monday, October 3, 2011 11:05 AM