RMON Commands 1463
console(config)#interface gigabitethernet 1/0/8
console(config-if-1/0/8)#rmon collection history 1
interval 2400
rmon event
Use the rmon event command in Global Configuration mode to configure an
event. To remove an event, use the no form of this command. See also the
show rmon events command.
Syntax
rmon event number [log] [trap

community

] [description
string
] [owner
string
]
no rmon event
number
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
Parameter Description
number The event index. (Range: 1–65535)
log An entry is made in the log table for each event.
trap An SNMP trap is sent to one or more management stations.
community If an SNMP trap is to be sent, it is sent to the SNMP
community specified by this octet string. (Range: 0-127
characters)
description string A comment describing this event. (Range 0-127 characters)
owner string Enter a name that specifies who configured this event. If
unspecified, the name is an empty string.
2CSPC4.XCT-SWUM2XX1.book Page 1463 Monday, October 3, 2011 11:05 AM