Dell vrrp timers learn

1278 Virtual Router Redundancy Protocol Commands
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets the frequency at which the VLAN 15 virtual
router 5 sends a virtual router advertisement.
console(config-if-vlan15)#vrrp 5 timers advertise 10
vrrp timers learn
Use the vrrp timers learn command in Interface Configuration mode to
configure the router, when it is acting as backup virtual router for a Virtual
Router Redundancy Protocol (VRRP) group, to learn the advertisement
interval used by the master virtual router. Use the no form of the c ommand to
prevent the router from learning the advertisement interval from the master
virtual router.
Syntax
vrrp group timers learn
no vrrp
group timers learn
• group — The virtual router identifier. (Range: 1-255)
Default Configuration
Timer learning is disabled by default and the router uses the configured
advertisement.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines.
2CSPC4.XCT-SWUM2XX1.book Page 1278 Monday, October 3, 2011 11:05 AM