1572 Syslog Commands
commands. However, if the logging on command is disabled, no messages are
sent to these destinations. In this case, only the console will continue to
receive logging messages.
Example
The following example shows how logging is enabled.
console(config)#logging on
logging snmp
Use the logging snmp command in Global Configuration mode to enable
SNMP Set command logging. To disable, use the no form of this command.
Syntax
logging snmp
no logging snmp
Default Configuration
Disabled.
Command Mode
Global Configuration mode
User Guidelines
To see SNMP Set command logs use the show logging command.
Example
console(config)#logging snmp
logging web-session
Use the logging web-session command in Global Configuration mode to
enable web session logging. To disable, use the no form of this command.
2CSPC4.XCT-SWUM2XX1.book Page 1572 Monday, October 3, 2011 11:05 AM