660 QoS Commands
console(config-policy-classmap)#drop
mark cos
Use the mark cos command in Policy-Class-Map Configuration mode to
mark all packets for the associated traffic stream with the specified class of
service value in the priority field of the 802.1p header. If the packet does not
already contain this header, one is inserted.
Syntax
mark cos
cos-value
•
cos-value
— Specifies the CoS value as an integer. (Range: 0–7)
Default Configuration
There is no default cos-value for this command. Packets are not remarked by
default.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to mark all packets with a CoS value.
console(config-policy-classmap)#mark cos 7
mark ip-dscp
Use the mark ip-dscp command in Policy-Class-Map Configuration mode to
mark all packets for the associated traffic stream with the specified IP DSCP
value.
Syntax
mark ip-dscp
dscpval
2CSPC4.XCT-SWUM2XX1.book Page 660 Monday, October 3, 2011 11:05 AM