116 Command Groups
DHCP Server and Relay Agent (IPv4)
show arp Displays the Address Resolution Protocol (ARP)
cache.
PE
show arp brief Displays the brief Address Resolution Protocol
(ARP) table information.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command Description Modea
ip dhcp pool Defines a DHCP address pool that can be used
to supply addressing information to DHCP
client. This command puts the user into DHCP
Pool Configuration mode.
GC
bootfile Sets the name of the image for the DHCP
client to load.
DP
clear ip dhcp binding Removes automatic DHCP server bindings. PE
clear ip dhcp conflict Removes DHCP server address conflicts. PE
client-identifier Identifies a a Microsoft® DHCP client to be
manually assigned an address.
DP
client-name Specif ies the host name of a DHCP client. DP
default-router Sets the IPv4 address of one or more routers for
the DHCP client to use.
DP
dns-server (IP DHCP Pool
Config)
Sets the IPv4 DNS server address which is
provided to a DHCP client by the DHCP server.
DP
domain-name (IP DHCP
Pool Config)
Sets the DNS domain name which is provided
to a DHCP client by the DHCP server.
DP
hardware-address Specifies the MAC address of a client to be
manually assigned an address.
DP
host Specifies a manual binding for a DHCP client
host.
DP
ip dhcp bootp automatic Enables automatic BOOTP address
assignments.
GC
ip dhcp conflict logging Enables DHCP address conflict detection. GC
Command Description Modea
2CSPC4.XCT-SWUM2XX1.book Page 116 Monday, October 3, 2011 11:05 AM