464 Green Ethernet Commands
Remote Tw_sys_tx Echo(usec).......... XX
Remote Tw_sys_rx (usec)............... XX
Remote Tw_sys_tx Echo(usec).......... XX
Remote fallback Tw_sys (usec)........ XX
Tx DLL enabled........................ Yes
Tx DLL ready.......................... Yes
Rx DLL enabled........................ Yes
Rx DLL ready.......................... Yes
Power Saving (%)...................... XX
Time Since Counters Last Cleared......... 1 day 20 hr
47 min 34 sec
show green-mode
Use the show green-mode command in Privileged EXEC mode to display the
green-mode configuration for the whole system. The status is shown only for
the modes supported on the corresponding hardware platform whether
enabled or disabled.
Syntax
show green-mode
Parameter Description
This command does not require a parameter description.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
2CSPC4.XCT-SWUM2XX1.book Page 464 Monday, October 3, 2011 11:05 AM