1328 Captive Portal Commands
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP)#user 1 group 3
user-logout
Use the user-logout command in Captive Portal Instance mode to enable
captive portal users to log out of the portal (versus having the session time
out). Use the no form of the command to return the user logout
configuration to the default.
Syntax
user-logout
no user-logout
Parameter Description
This command does not require a parameter description.
Default Configuration
User-logout is disabled by default.
Command Mode
Captive-portal Instance mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all classes of entries in the mac address-table are displayed.
console(config)#captive-portal
console(config-CP)#user 1 name asd
console(config-CP)#configuration 1
2CSPC4.XCT-SWUM2XX1.book Page 1328 Monday, October 3, 2011 11:05 AM