Multicast VLAN Registration Commands 619
MVR Group IP Status Members
------------------ --------------- ---------------------
224.1.1.1 INACTIVE 1/0/1, 1/0/2, 1/0/3
console#show mvr members 224.1.1.1
MVR Group IP Status Members
------------------ --------------- ---------------------
224.1.1.1 INACTIVE 1/0/1, 1/0/2, 1/0/3
show mvr interface

Use the show mvr interface command in Privileged EXEC mode to display

the MVR enabled interfaces configuration.

Syntax

show mvr interface [

interface-id

[members [vlan

vid

]] ]

Parameter Description

The following table explains the output parameters.

Parameter Description
Interface-id Identifies a specific interface.
VID VLAN identifier.
Parameter Description
Port Interface number
Type The MVR port type. It can be None,
Receiver, or Source type.
Status The interface status. It consists of two
characteristics:
1
active
or
inactive
indicating if port is
forwarding.
2
inVLAN
or
notInVLAN
indicating if the
port is part of any VLAN
2CSPC4.XCT-SWUM2XX1.book Page 619 Monday, October 3, 2011 11:05 AM