802.1x Commands 825
console# dot1x re-authenticate gigabitethernet 1/0/16
dot1x reauthentication
Use the dot1x reauthentication command in Interface Configuration mode
to enable periodic re-authentication of the client. To return to the default
setting, use the no form of this command.
Syntax
dot1x reauthentication
no dot1x reauthentication
Default Configuration
Periodic re-authentication is disabled.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
Example
The following example enables periodic re-authentication of the client.
console(config)# interface gigabitethernet 1/0/16
console(config-if-1/0/16)# dot1x reauthentication
dot1x system-auth-control monitor
Use the dot1x system-auth-control monitor command in Global
Configuration mode to enable 802.1x monitor mode globally. To disable this
function, use the no form of this command.
Syntax
dot1x system-auth-control monitor
no dot1x system-auth-control monitor
2CSPC4.XCT-SWUM2XX1.book Page 825 Monday, October 3, 2011 11:05 AM