1004 IPv6 PIM Commands
Interface VLAN0001
Mode Sparse
Hello Interval (secs) 30
Join Prune Interval (secs) 60
DR Priority 1
BSR Border Disabled
Neighbor Count 1
Designated Router 2001:db8:85a3:0:0:8a2e:370:7334
If none of the interfaces are enabled for PIM, the following message is
displayed:
None of the routing interfaces are enabled for PIM
show ipv6 pim neighbor
Use the show ipv6 pim neighbor command to display IPv6 PIM neighbors
discovered by PIMv2 Hello messages. If the interface number is not specified,
this command displays the neighbors discovered on all the PIM-enabled
interfaces.
Syntax
show ipv6 pim neighbor [vlan
vlan-id
]
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC modes
Parameter Description
vlan-id A valid VLAN ID for which multicast routing has been enabled.
2CSPC4.XCT-SWUM2XX1.book Page 1004 Monday, October 3, 2011 11:05 AM