IGMP Snooping Querier Commands 495
Example
The following example enables IGMP snooping querier in VLAN
Configuration mode.
console(config-vlan)#ip igmp snooping querier 1
address 10.19.67.1
ip igmp snooping querier election participate
This command enables the Snooping Querier to participate in the Querier
Election process when it discovers the presence of another Querier in the
VLAN. When this mode is enabled, if the Snooping Querier finds that the
other Querier source address is more than the Snooping Querier address, it
stops sending periodic queries. If the Snooping Querier wins the election,
then it continues sending periodic queries. The no form of this comm and se ts
the snooping querier not to participate in the querier election but to go into a
non-querier mode as soon in as it discovers the presence of another querier in
the same VLAN.
Syntax
ip igmp snooping querier election participate
vlan-id
no ip igmp snooping querier election participate
vlan-id
Default Configuration
The snooping querier is configured to not participate in the querier election
by default.
Command Mode
VLAN Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the snooping querier to participate in the
querier election.
2CSPC4.XCT-SWUM2XX1.book Page 495 Monday, October 3, 2011 11:05 AM