Serviceability Tracing Packet Commands 1487
debug auto-voip
Use the debug auto-voip command to enable Auto VOIP debug messages.
Use the optional parameters to trace H323, SCCP, or SIP packets respectively.
Use the “no” form of this command to disable Auto VOIP debug messages.
Syntax
debug auto-voip [ H323 | SCCP | SIP ]
no debug auto-voip [ H323 | SCCP | SIP ]
Default Configuration
Auto VOIP tracing is disabled by default.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no usage guidelines for this command.
Example
console#debug auto-voip
debug clear
Use the debug clear command to disable all debug traces.
Syntax
debug clear
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
2CSPC4.XCT-SWUM2XX1.book Page 1487 Monday, October 3, 2011 11:05 AM