Power Over Ethernet Commands 1453
power inline reset
Use the power inline reset command to reset the port.
Syntax Description
power inline reset
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration
User Guidelines
This command is useful if the port is stuck in Error state.
power inline usage-threshold
The power inline usage-threshold command configures the system power
usage threshold level at which low er priority ports are disconnected. The
threshold is configured as a percentage of the total available power. Use the
no form of the command to set the threshold to the default value.
Syntax Description
power inline usage-threshold
threshold
no power inline usage-threshold
Parameter Description
Default Configuration
The default threshold is 96%.
Parameter Description
threshold Power threshold at which trap is generated. The range is 1-99%.
2CSPC4.XCT-SWUM2XX1.book Page 1453 Monday, October 3, 2011 11:05 AM