Dell aaa accounting network default start-stop group radius, acct-port

RADIUS Commands 705
aaa accounting network default start-stop group
radius
Use the aaa accounting network default start-stop group radius command to
enable RADIUS accounting on the switch. Use the “no” form of this
command to disable RADIUS accounting.
Syntax
aaa accounting network default start-stop group radius
no aaa accounting network default start-stop group radius
Default Configuration
RADIUS accounting is disabled by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#aaa accounting network default start-
stop group radius
acct-port
Use the acct-port command to set the port that connects to the RADIUS
accounting server. Use the "no" form of this command to reset the port to the
default.
Syntax
acct-port port
no acct-port
• port — The layer 4 port number of the accounting server (Range: 1 -
65535).
2CSPC4.XCT-SWUM2XX1.book Page 705 Monday, October 3, 2011 11:05 AM