Dell passwords strength minimum character-classes

Password Management Commands 1435
Syntax
passwords strength max-limit repeated-characters 0-15
no passwords strength max-limit repeated-characters
Parameter Description
This command does not require parameter descriptions.
Default Behavior
The default value is 0.
Command Mode
Global Configuration
User Guidelines
This command has no user guidelines.
Example
console(config)# passwords strength max-limit repeated-characters 3
passwords strength minimum character-classes
Use this command to enforce a minimum number of character classes that a
password should contain. Character classes are uppercase letters, lowercase
letters, numeric characters and special characters. The valid range is 0-4. The
default is 0. If a value of 0 is configured then no character class checking is
performed, i.e. for special characters, uppercase characters, lower-case
characters, etc. Use the no form of this command to reset the minimum
character-classes to the default value.
Syntax
passwords strength minimum character-classes 0-4
no passwords strength minimum character–classes
Parameter Description
This command does not require parameter descriptions.
2CSPC4.XCT-SWUM2XX1.book Page 1435 Monday, October 3, 2011 11:05 AM